Advertisement
Concord Eye-Q 3042AF
After taking a picture or two, my camera suddenly turns off. Is there something
wrong with it?
There is nothing wrong with your camera. The camera has a built-in power saving
feature that turns the camera off after more than 2 minutes of inactivity (default
setting) to conserve battery power. The auto off time setting can be changed in the set
up menu.
Changing the Auto off Time Setting:
1. Set the camera to Camera Mode.
2. Press the Menu button to display the main menu.
3. Press until the Setup is highlighted.
4. Press to enter the Setup submenu.
5. In the Setup menu, press to highlight "Auto Off Time".
6. Press to enter "Auto Off Time". Press
to highlight the time you want.
7. Press the OK button to save your selection.
My camera does not recognize the Secure Digital (SD) card. What can I do?
Please make sure that the card is completely inserted into the Secure Digital card slot.
If you have difficulties inserting the card completely, you may have inserted the card
incorrectly. Please reverse the position of the card and reinsert the card. If you
continue to have difficulties, your card may be corrupted. This can happen if a card is
used in more than one digital camera. Not to worry. This can be easily fixed by re-
formatting the card. Please remember that in formatting the card, all pictures and
videos will be erased, including those that may be protected.
Advertisement
