Fagor 3VFT-33AC Instruction Manual page 37

OPERATION
Control Panel
When you connect the appliance to power,
Child Lock indicator (7) will be on. Touch
and hold the Child Lock sensor (7) until the
indicator is off. Now you can use the appliance.
No objects should be placed on
the sensors (this could cause an
error). Touch sensors should be
always kept clean.
Switch on the appliance
When the appliance is switched off then all
the cooking zones are disconnected and the
indicators are off.
Touch the on/off sensor field (1) to turn on the
appliance. "0" will appear on all cooking zone
displays (3) for 10 seconds . After selecting a
desired cooking zone by touching the cook-
ing zone selection sensor field (2) (see "Set
the heating power"), now the desired heat
setting can be selected using the (+)(5) or (-)
(4) sensor fields
If none of the sensors is touched within 10 seconds, the appliance switches
itself off.
If child lock function is activated, the appliance cannot be switched on (see
"Release the child lock") .
Switch on the cooking zone
After switching on the appliance using the
on/off sensor field (1) cooking zones can be
operated as follows:
1. Select the desired cooking zone using the
cooking zone selection sensor field (2)
(Sensor field layout reflects the layout of
individual cooking zones),
2. Set the desired heat setting using the (+)
(5) or (-)(4) sensor fields,
3. To change the heat setting again as
described in point 1, select the desired
cooking zone using the cooking zone
selection sensor field (2), and then set the
desired heat setting using the (+)(5) or (-)
(4) sensor fields.
If none of the sensor fields is touched within 10 seconds, the cooking zone
switches off.
A cooking zone is active when corresponding digit " " is blinking. This indicates
a cooking zone is ready for the heat setting to be set or changed.
2
3
2
3
4
1
2
2
4
7
3
5
5
37