Download Print this page

Troubleshooting; Before Using - Conair MN251RCSC User Manual

3 in one trimmer for mustache, brow and nose

Advertisement

IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be taken,
including the following:
READ ALL
INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM
WATER
DANGER
Any appliance is
electrically live, even when the switch is off.
To reduce the risk of death or injury by
electric shock:
1. Always unplug appliance from electrical
outlet immediately after using (except when
charging unit).
2. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
3. Do not use appliance while bathing or in
the shower.
4. Do not place appliance in, or drop into
water or other liquid.
5. If appliance has fallen into water, do not
reach for it. Unplug immediately.
6. Unplug appliance from electrical outlet
immediately before cleaning.
DO NOT REACH
INTO THE WATER
WARNING
To reduce the risk
of burns, electric shock, fire, or injury to
persons:
1. Never leave a plugged-in appliance
unattended.
2. Use close supervision when the appliance
is used by, on, or near children or invalids.
3. Use appliance only for its intended use as
described in this manual. Only use attach-
ments recommended by the manufacturer.
Do not use an extension cord to operate the
appliance.
4. Never operate the appliance if it has a
damaged cord or plug, is not working
properly, has been dropped or damaged,
or dropped into water. Return the appliance
to a Conair service center for examination
and repair.
5. Keep the appliance cord away from
heated surfaces.
6. Do not pull, twist or wrap the cord around
the appliance.
7. Never drop or insert any object into any
opening of the appliance.
8. Do not place the appliance on any surface
while it is operating.
9. Do not use the appliance with a damaged
or broken comb or with teeth missing from
the blades, as injury may result. Before each
use, make certain the blades are aligned
properly and oiled.
10. Do not use the appliance outdoors or
operate where aerosol (spray) products are
being used or oxygen is being administered.
SAVE THESE
INSTRUCTIONS

TROUBLESHOOTING

There are several things to look for if your
trimmer fails to operate:
1. Be sure the trimmer is turned ON.
2. Make sure that the battery is properly
placed in the battery compartment. Test the
battery to be sure it is working. (For
MN250RCSC only)
3. Check the blades to see if they are
clogged with hair clippings; if so, use the
cleaning brush to remove hair.
4. If the trimmer still fails to operate, take or
send it to a Conair Service Center (see war-
ranty procedure and addresses).
If your rechargeable trimmer does not
seem to be taking a charge, take the
following troubleshooting steps before
returning it for repair:
1. Be sure the electrical outlet is working, by
plugging in another appliance to test it.
2. Make sure the electrical plug is not
connected to a switch which turns power off
when lights are turned off.
3. Be sure you have inserted the trimmer
properly into the charging stand, that all
connections are secure, and that the
trimmer switch is in the "OFF" position.
FOR HOUSEHOLD
USE ONLY
OPERATING INSTRUCTIONS
FOR YOUR MN251RCSC
RECHARGEABLE TRIMMER
Check to be sure which model
you have purchased.
1. Before using your trimmer for the first
time, insert the trimmer in the charging
base and then plug into wall outlet and
charge it for 16 hours. Always place the
trimmer in the stand with the ON/OFF switch
in the OFF position.
2. Always check to see if the charging light
is on when the cord is connected to the
trimmer and the unit is not in use.
3. Plug unit into any 120V, 60hz wall outlet.
4. The trimmer can remain plugged into the
power source at all times without damage to
the battery.
5. To use your trimmer, push On/Off switch
upwards to "On" position.
6. After you finish using your trimmer, push
down on the On/Off switch to turn the trim-
mer off.
7. If, while trimmer is in use, the charge
seems to be running down, simply put
ON/OFF switch in OFF position. Then, insert
the trimmer in the charging base and plug
into wall outlet. Allow battery to recharge for
several hours.
8. To maintain the full charging capacity and
extend the life of the battery, it must be

Advertisement

loading

This manual is also suitable for:

Mn250rcsc