Mazda MX-5 2021 Manual page 273

Interior Features
Mazda Connect
Commands useable anytime during voice recognition
"Go Back" and "Cancel" are commands which can be used at anytime during voice
recognition.
Returning to previous operation
To return to the previous operation, say, "Go Back" while in voice recognition mode.
Cancel
To put the Bluetooth
recognition mode.
To prevent a deterioration in the voice recognition rate and voice quality, the following
points should be observed:
The voice recognition cannot be performed while voice guidance or the beep sound is

operating. Wait until the voice guidance or the beep sound is finished before saying a
command.
Phone related commands are available only when a phone is connected via Bluetooth

Make sure a phone is connected via Bluetooth
commands.
Music play commands, such as Play Artist and Play Album can be used only in USB

audio mode.
Do not speak too slowly or loudly (no loud voice).

Speak clearly, without pausing between words or numbers.

Dialects or different wording other than hands-free prompts cannot be recognized by

voice recognition. Speak in the wording specified by the voice commands.
It is not necessary to face the microphone or be close to it. Speak the voice commands

while maintaining a safe driving position.
Close the windows and/or the convertible top to reduce loud noises from outside the

vehicle, or turn down the airflow of the climate control system while Bluetooth
Hands-Free is being used.
Make sure the vents are not directing air up towards the microphone.

5-24
®
Hands-Free system in standby mode, say, "Cancel" while in voice
®
before you operate phone related voice
®
.
®