Mazda MX-5 2021 Manual page 256

4. Set the fan control dial to the desired
speed.
5. If dehumidified heating is desired, turn
on the air conditioner.
NOTE
If the windshield fogs up easily, set the

mode selector dial to the
If cooler air is desired at face level, set

the mode selector dial at the
and adjust the temperature control dial
to maintain maximum comfort.
The air to the floor is warmer than air

to the face (except when the temperature
control dial is set at the extreme hot or
cold position).
position.
position
Climate Control System
▼ Cooling
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
cold position.
3. Set the fan control dial to the desired
speed.
4. Turn on the air conditioner by pressing
the A/C switch.
5. After cooling begins, adjust the fan
control dial and temperature control
dial as needed to maintain maximum
comfort.
CAUTION
If the air conditioner is used while driving
up long hills or in heavy traffic, monitor the
high engine coolant temperature warning
indication/warning light to see if it is
illuminated or flashing (page 7-33).
The air conditioner may cause engine
overheating. If the warning light is
illuminated or flashing, turn the air
conditioner off (page 7-27).
NOTE
When maximum cooling is desired, set

the temperature control dial to the
extreme cold position and set the air
intake selector to the recirculated air
position, then turn the fan control dial
fully clockwise.
If warmer air is desired at floor level,

set the mode selector dial at the
position and adjust the temperature
control dial to maintain maximum
comfort.
Interior Features
5-7