Mazda MX-5 2021 Manual page 257

Interior Features
Climate Control System
The air to the floor is warmer than air

to the face (except when the temperature
control dial is set at the extreme hot or
cold position).
▼ Ventilation
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the outside
air position (indicator light turns off).
3. Set the temperature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
▼ Windshield Defrosting and
Defogging
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
desired position.
3. Set the fan control dial to the desired
speed.
4. If dehumidified heating is desired, turn
on the air conditioner.
WARNING
Do not defog the windshield using the
position with the temperature control set
to the cold position:
Using the position with the temperature
control set to the cold position is
dangerous as it will cause the outside of the
windshield to fog up. Your vision will be
hampered, which could lead to a serious
accident. Set the temperature control to
the hot or warm position when using the
position.
5-8
NOTE
For maximum defrosting, turn on the air

conditioner, set the temperature control
dial to the extreme hot position, and turn
the fan control dial fully clockwise.
If warm air is desired at the floor, set the

mode selector dial to the
When the fan control dial is ON, and the

mode selector dial is in the
position, the air conditioner is
automatically turned on and the outside
air position is automatically selected to
defrost the windshield. In the
position, the outside air position cannot
be changed to the recirculated air
position.
position.
or
or