1
Approvals and Codes
Approval Listing and Codes
The Royal models discussed in this Installers Guide have
been tested to certification standards and listed by the
applicable laboratories.
R-Maxin
Underwriters Laboratories
Direct Vent Gas Fireplace Heater
ANSI Z21.88CSA2.33UL307B
The appliance installation must conform to local codes. Before
installing the appliance, consult the local building code
agency to ensure that you are in compliance with all
applicable codes, including permits and inspections.
In the absence of local codes, the appliance installation must
conform to the National Fuel Gas Code ANSI Z223.1 (in the
United States) or the CAN/CGA-B149 Installation Codes (in
Canada). The appliance must be electrically grounded in
accordance with local codes or, in the absence of local codes
with the National Electric Code ANSI/NFPA No. 70 (in the
United States), or to the CSA C22.1 Canadian Electric Code
(in Canada).
These models may be installed in a bedroom or bed-sitting
room in the U.S.A. and Canada.
Homologations et codes dinstallation
Homologations et codes
Les modèles Royal présentés dans ce Guide dinstallation
ont été soumis à des tests dhomologation standard et ont
été approuvés par les laboratoires concernés.
Linstallation doit être conforme aux codes locaux. Avant
dinstaller cet lappareil, consulter lautorité locale en matière
de codes de construction pour assurer la conformité de
linstallation avec les codes et règlements locaux en vigueur.
En labsence de codes locaux, se conformer au National
Fuel Gas Code ANSI Z223.1 (aux États-Unis) ou aux Codes
dinstallation CAN/CGA-B149 (au Canada). Lappareil doit être
mis à la masse conformément aux codes locaux ou, en
labsence de ces derniers, conformément au National Electric
Code ANSI/NFPA No. 70 (aux États-Unis) ou au CSA C22.1
Code Électrique Canadian (au Canada).
Ces modèles peuvent être installés dans une chambre à
coucher ou dans un salon aux États-Unis ou au Canada.
7
R-Maxin
Underwriters Laboratories
Casette de cheminée à gaz à
système dévacuation directe
ANSI Z21.88CSA2.33UL307B