Honda DREAM125 2018 Owner's Manual page 64

3. Place your motorcycle on its centre stand
on a firm, level surface.
4. Place a drain pan under the drain bolt.
5. Remove the oil fill cap/dipstick, drain bolt,
and sealing washer to drain the oil.
Discard the oil at an approved
u
recycling centre.
Drain bolt
6. Install a new sealing washer onto the drain
7. Fill the crankcase with the recommended
Sealing washer
8. Check the oil level.
9. Check that there are no oil leaks.
Engine Oil
u
bolt. Tighten the drain bolt.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
oil ( P. 41, 102) and install the oil fill
2
cap/dipstick.
Required oil
When changing oil:
0.7 litres (0.7 US qt, 0.6 Imp qt)
2
Changing Engine Oil
P. 57
59