Toro RECYCLER 59291 Installation Instructions Manual page 4

Mower side discharge kit
Table of Contents

Advertisement

Available languages

Available languages

POTENTIAL HAZARD
Grass clippings and other objects can be
thrown from an open discharge tunnel.
WHAT CAN HAPPEN
Objects thrown with enough force could
cause serious personal injury or death to
operator or bystander.
HOW TO AVOID THE HAZARD
Never open door on discharge tunnel when
engine is running unless the side discharge
chute, discharge tunnel plug or optional
grass bag is securely installed.
Using Discharge Tunnel Plug
1.
Make sure engine is turned off. Open discharge
door by moving handle rearward (Fig. 6). Hold
the discharge door fully open while inserting the
plug.
2
1
Figure 6
1. Plug
2.
Insert the plug into the discharge tunnel opening
and fit the lower section into the opening first
(Fig. 7).
EN–4
2011
2. Discharge door handle
Figure 7
1. Door latch
3.
Lift door latch on door handle (Fig. 7). Push the
top of the plug all the way in while moving the
door handle rearward. Release the door latch,
allowing it to hook over tabs on plug (Fig. 8).
Figure 8
1. Tab (2)
4.
To remove the plug, pull up on the door latch
and hold discharge door fully open. When the
plug is unlocked, pull the plug out of the
discharge tunnel.
Note:
To ease installation and removal of the
plug, hold the door fully open so it will
not interfere with the lower end of the
plug.
1
2012
1
2013

Advertisement

Table of Contents
loading

Table of Contents