Load File From Usb; Bendworks™ Software Troubleshooting - Greenlee IntelliBENDER 855GX Instruction Manual

Operation (cont'd)

Load File from USB

1. Press the button next to the bend you want to
begin. The number of pages appears on the top
right. To scroll through the list of saved bends, press
the NEXT and BACK buttons.
Pressing BACK on page 1 returns you to the
previous screen.
Notes:
• Straight conduits will be labeled as "CONCEN 0°".
• Completed bends will be labeled as "DONE".
2. A summary appears of all bends with up to five
bends per page. On the bottom is the total length
of the conduit. Press the NEXT button to continue
to individual bend instructions, or press the BACK
button to return to the file select screen.
Greenlee Tools, Inc.
855GX Electric Bender
Note: A bend with the label "CONCEN 0°" indicates
there are no bends to be made. Select BACK to
return to the file select screen.
BendWorks™ Software Troubleshooting
When BendWorks™ software encounters any of the
errors in the table on the next page, it outputs an error
code to a CSV file. Each error has an Error # and Error
Code.
16
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070