9.5.2
Removing a PCIe card from a riser module
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver / hexagon screw driver 5 mm
9.5.2.1
Preliminary steps
"Shutting down the server" on page 40
Ê
Ê If applicable, remove all external cables from the PCIe card to be removed.
"Disconnecting the power cord" on page 41
Ê
"Getting access to the component" on page 42
Ê
"Removing the rear top cover" on page 47
Ê
9.5.2.2
Removing the left or right PCIe/GPU riser module
Figure 108: Removing the PCIe/GPU riser module
Ê Remove the four screws (see circles).
Ê Remove the riser module.
GX2460 M1
Upgrade and Maintenance Manual
Expansion cards and riser modules
Hardware: 10 minutes
149