Isofix Child Restraint Systems - Chevrolet Blazer Owner's Manual

ISOFIX Child Restraint Systems

Rear Seat
The ISOFIX anchors are located near the
crease between the seatback and the seat
cushion and identified with the symbol
Fasten ISOFIX child restraints to the ISOFIX
anchors.
Specific vehicle ISOFIX child restraint
positions are marked in the ISOFIX Child
Restraint Installation Suitability table. See
Where to Put the Restraint 0 65.
Securing a Child Restraint to the ISOFIX
Anchors
1. Position the child restraint on the front
of the seat on which it will be installed.
2. Lock the ISOFIX attachments to the
ISOFIX anchors following the instructions
that came with the child restraint.
3. Ensure the child restraint is securely
mounted to the seat.
4. A top tether strap or support leg must
be used in addition to the ISOFIX
anchors.
Top Tether Anchors of Vehicle
.
Top tether anchors are located on the back
of the second row seatbacks and are always
aligned with rear seats and identified with
the symbol .
Seats and Restraints
Do not attach anything other than a child
restraint system to the vehicle top tether
anchors.
Instructions for attaching the child restraint
to the top tether anchor:
If the child restraint manufacturer
recommends that the top tether be
attached, attach and tighten the top tether
to the top tether anchor, if equipped. Refer
to the child restraint instructions and the
following steps:
1. Find the top tether anchor.
2. Route, attach, and tighten the top tether
according to your child restraint
instructions and the following
instructions:
69