NCTE torque sensors
Series 2000
Short description
The series 2000 is the most easy and affordable entry into torque measurement technology.
This series is mainly used in testing facilities, automation process, production lines e. g. end-of-line tests and
Research and Development.
Transmitted torque can be measured statically and dynamically in real time. Shaft is available as Round shaft
and Square shaft. Series 2000 offers a 0-5 V output signal.
The sensor is provided as a complete unit with integrated evaluation electronic, including 5 m cable,
keystones (Round shaft) and calibration certificate.
Optionally, the 2000 Series is available for explosive atmospheres
Conform to the EU ATEX directives for Zone 2
Additional zones on request
Distribuito da: LUCHSINGER SRL
email: info@luchsinger.it
www.luchsinger.it
Technical data
Measuring range in Nm (+/-): 2,5; 5; 7,5; 17,5; 75;
175; 250; 500
Rotational speed: ≤ 5.000 rpm
Accuracy: ≤ ±1 %
Temperature range: -40 °C to +85 °C
Protection class: IP50
Output signals: 0-5 V
Output frequency: 1.000 Hz
Your advantages
Made in Germany (Munich, Bavaria)
Delivery ex warehouse (
Best price-performance ratio
Integrated electronic (Plug & Play)
Contactless measurement system
Including 5 m cable and calibration certificate
- All data without guarantee, except technical modification -
two weeks)
<
Page 1 - 10
V18-03