Table of Contents
Advertisement
4
5
6
1. Insert "I/F BD to LED
Driver BD wire" to I/F BD
and paste 1 adhesive tape
to fix it
(See red mark)
2. Insert CTRL FFC Cable to
I/F BD
Note:
The last piece of double-
sided tape needs to be
pasted on Main SHD
3. Insert USB FFC Cable and
Audio FFC Cable to I/F BD
1. Following the order to
assemble Rear Cover with
Middle Frame
2. Lock 4 screws on Rear
Cover
1. Align and place the stand
riser on the stand base
2. Open the screw handle at
the bottom of the stand
base and turn it clockwise
to secure the stand
assembly
3. Close the screw handle
4. Slide the tabs on the stand
riser into the slots on the
display back cover and
lower the stand assembly
to snap it into place
- 14 -
Philips-head
screwdriver
(Torsion of
RC screw:
8~10Kg)
Philips-head
screwdriver
Torsion of RC
screw:
8.5±1.0kgf
Advertisement
Table of Contents
