Stopping Navigation In Progress; Back To Departure Point - Yaesu FTA-850L Operating Manual

Stopping navigation in progress

1. Press the [FUNC] key to display the NAVI Func
screen.
2. Press the [▲] / [▼] keys
to select "Stop" and then
press the [ENT] key.
The same operation as
above is possible by press-
ing the [3] key.
3. A confirmation screen will
be displayed. To end navi-
gation, press the [ENT]
key.
Stop the navigation and dis-
play the compass screen.

Back to departure point

You can easily return to the starting point during
navigation. If you are in the process of route navi-
gation, the reverse route navigation will be started
and you will be able to return to the waypoints you
have passed from the starting point (Origin) in the
reverse order.
1. Press the [FUNC] key to display the NAVI Func
screen.
2. Press the [▲] / [▼] keys to
select "Back" and press the
[ENT] key.
The same operation as
above is possible by press-
ing the [4] key.
3. A confirmation screen will
be displayed. To return to
the starting point, press
the [ENT] key. Navigation
to the starting point begins.
Note:
• In the case of waypoint navigation, the destination
is the starting point of latitude and longitude saved
by GPS when the navigation is started.
• If GPS is not positioned and latitude / longitude
cannot be saved, an error alarm will sound and
navigation to the departure point cannot be started.
63