Table of Contents
Advertisement
9020 QRB3000CA-3-ENGLISH
Trip planner
Trip planner
In addition to individual destinations, the NAV ONE can store up to five trips with
up to ten destinations to be visited in sequence on each trip. Trips stored in system
memory can be repeatedly recalled and used, and trips can be added, named,
edited and deleted.
Plan a trip
Select ADD at the
Trip Planner menu and enter a name for the trip. Then, add destinations using the programming
sequences for Address/Intersection, Point of Interest, Previous Destination, Address Book or Current Location.
After all destinations have been added, press the SAVE function button.
Navigate a trip
Select the trip at the
Trip Planner menu and press ENTER. Select any destination on the list as the first one to
be reached and press ENTER or the GO function button to proceed to the
calculation. Navigate to the destination using Route Guidance procedures.
As each destination is reached, the next one can be selected and navigated to.
At the end of the trip, or at any point along it, select [Discontinue Trip] and press ENTER to return to the
Modify a trip
Any trip stored in system memory can be deleted. Also trip and destination names can be changed and destinations
can be added and deleted by selecting the trip and pressing the EDIT function button and following the steps on
succeeding menus.
9/28/04
3:44 PM
Page 15
Select Route Criteria menu, then route
Main menu.
15
Trip Planner
VIEW
Mondays Trip
ADD
Thursdays Trip
Vacation
Weekend Trip
EDIT
BACK
Add Destination to Trip
Address/Intersection
Point of Interest
Previous Destination
Address Book
Current Location
BACK
Advertisement
Table of Contents
