Tools Required; Disassembly Procedures - Dell E2722HS Service Manual

2. Wiring connectivity diagram

3. Tools Required

List the type and size of the tools that would typically can be used to disassemble the product to a point
where components and materials requiring selective treatment can be removed.
Tool Description:
‐ Screwdriver (Phillip-head, Hexagonal head)
‐ Penknife

3.1Disassembly Procedures

Tools: 2 Power screwdrivers (φ=5mm, L=60mm); 1 small cross screwdriver; turnbuckle driver;
Setting: Power screwdriver torque A=6 kgF.Cm
Step
Remove the
Base ass'y.
Figure TOOl Remark
Unscrew the screw
loosely by hand and
pull out the stand.
Note:
Put the monitor on a
flat, soft and clean
surface.