Cobra microTALK PR 240 Owner's Manual page 8

Product Features
Operation
To Scan Privacy Codes:
Channel Button
1. While in Standby Mode,
or Channel
channel you wish to scan.
2. Press the
Select Channel
the privacy code number flashes on the display.
3. Press the
and your radio will begin scanning privacy
codes within the main channel you selected.
Mode Button
4. The Scan icon will continue to be displayed
when Scan is On. Your radio will continue
to scan privacy codes and stop an incoming
transmission is detected. Your radio will remain
on that channel and privacy code for ten (10)
Scan Privacy Codes
seconds. During this time, you can:
a. Press and hold the Talk
communicate with others. Your radio
will remain on that channel and privacy
code and return to
b. Press the
button to
c. Press the
other functions.
If you press the Talk
and not within ten (10) seconds of receiving
a transmission, you will transmit on the last
channel you transmitted or received on.
If you do not press any button within ten (10)
seconds, your radio will automatically resume
scanning privacy codes.
12 English
press the Channel
Down button to choose the main
Mode button until the Scan icon and
Channel Up or Channel Down button
button to
Standby Mode.
Channel Up or Channel Down
resume scanning privacy codes.
Mode button to proceed to
button while scanning,
Introduction
Mode Button
Up
Call Tone Setting
Channel Button
Mode Button
Roger Beep Off
Channel Button
Operation Customer Assistance
10 Call Tone Settings
You can choose between ten (10) different call
tone settings to transmit a unique call alert.
To Change a Call Tone Setting:
1. Press the Mode button until the letter "C"
and the current call tone number (1 through
10) is displayed. The current call tone will
sound for one (1) second.
2. Press the Channel Up or Channel
button to hear the other call tone settings.
3. a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press the Lock button to enter the new
setting and return to Standby Mode.
"Roger Beep" Confirmation Tone
Your listener will hear an audible tone when you
release the Talk button. This alerts the other party
that you are finished talking and it is
to speak. This feature can be turned On or Off.
To Turn "Roger Beep" On or Off:
When turning On your microTALK
for the first time, "Roger Beep" will be On.
1. Press the Mode button until the Roger
Beep icon flashes. The current On or
Off setting is displayed.
2. Press the Channel Up or Channel
button to select "Roger Beep" On or
3. a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press the Lock button to enter the new
setting and return to Standby Mode.
The setting you select will be saved when you
turn your radio Off and On again. When the
"Roger Beep" is On, the "Roger Beep" icon
will be displayed.
Nothing comes close to a
Warranty
•
Down
•
OK for them
® radio
Down
Off.
Cobra ™ 13