Cobra microTALK PR 240 Owner's Manual page 7

Using Your Radio
Operation
To Listen to All Hazards Radio Channels
Mode Button
(PR 350 WX only):
1. Press the
(All Hazards Radio) icon and the currently
selected All Hazards Radio channel are
Hazards Radio Icon
displayed.
2. Use the Channel
button to change All
3. Weather (All Hazards Radio) icon will continue
to be displayed when All Hazards Radio is On.
Channel Button
a. Press the
to other functions.
b. Press the
Radio channel mode and return to
Standby Mode.
Mode Button To Turn On All Hazards Alert (PR 350 WX only):
1. Press the
flashes and the current On or Off setting is
displayed.
2. Press the
Hazards Alert Icon
to turn All Hazards Alert On or Off.
3. Alert icon will continue to be displayed when
All Hazards Alert is On.
a. Press the
Channel Button
setting and proceed to other functions.
b. Press the
buttons for 15 seconds to enter the new
setting and return to
c. Press the Talk
settings and return to
English
10
Mode button until the Weather
Up or Channel Down
Hazards Radio channels.
Mode button to proceed
Lock button to exit All Hazards
Mode button until the Alert icon
Channel Up or Channel Down button
Mode button to enter the new
Lock button or do not press any
Standby Mode.
button to keep original
Standby Mode.
Introduction Operation
Scan
Mode Button
Your microTALK
main channels (1 through 22) or the privacy codes
(00 through 38) within one (1) main channel.
To Scan Main Channels:
Scan Channels
1. Press the
the main channel number flashes on the display.
2. Press the
to begin scanning the main channels.
Channel Button
The radio ignores privacy codes while
scanning main channels.
3. The Scan icon will continue to be displayed
when Scan is On. Your radio will continue to
scan all main channels and stop if an incoming
transmission is detected.Your radio will remain
on that channel for ten (10) seconds.
During this time, you can:
a. Press and hold the Talk
with others. Your radio will remain on that
channel and return to
b. Press the
button to
c. Press the
privacy code scanning (see page 12
for further details).
If you press the Talk
and not within ten (10) seconds of receiving
a transmission, you will transmit on the last
channel you transmitted or received on.
If you do not press any button within ten (10)
seconds, your radio will automatically resume
scanning main channels.
Customer Assistance Warranty
® radio can automatically scan
Mode button until the Scan icon and
Channel Up or Channel Down button
button and communicate
Standby Mode.
Channel Up or Channel Down
resume scanning channels.
Mode button to proceed to
button while scanning,
Nothing comes close to a Cobra
•
™ 11