Download Print this page

Cobra microTALK PR 240 Owner's Manual page 6

Cobra microtalk pr 240: user guide
Hide thumbs Also See for microTALK PR 240:

Advertisement

Available languages

Available languages

Using Your Radio
Operation
CTCSS Privacy Codes
38 Privacy Codes
CTCSS (Continuous
is an advanced tone coding system allowing you
to select one of 38 privacy codes to reduce
interference from other users on the channel.
If you are using a privacy code, both
radios must be tuned to the same channel
and privacy code to communicate. Each
channel will remember the last privacy
code you selected.
To Select a Privacy Code:
Mode Button
1.
After selecting a channel, press the
button until the small numbers next to the
channel number flash on the LCD.
2. Press the
Privacy Code
to select a privacy code. You can hold the
or Down button for fast advance.
3. When your desired privacy code is displayed:
a. Press the
Channel Button
setting and proceed to other functions.
b. Press the
setting and return to
c. Do not press any buttons for 15 seconds
to enter the new setting and return to
Standby Mode.
Listening for a Response
Listening
When
You are Finished Talking:
1.
Release the Talk
transmissions. Your microTALK
always in
Call buttons
English
8
Tone Coded Squelch System)
Mode
Channel Up or Channel Down button
Mode button to enter the new
Lock button to enter the new
Standby Mode.
button to
receive incoming
®
radio is
Standby Mode while the
Talk
or
are not pressed.
Introduction
Volume Button
Volume Level
Call Button
Up
Hazards Radio Icon
Hazards Alert Icon
Operation
Customer
Assistance
Volume
To Adjust the Volume:
1.
Press the Volume Up
or
Volume Down
A double beep sound is used to indicate
the minimum and maximum volume levels
(L1 through L7).
Call Button
To Alert Another Person That You Are Calling:
1.
Press and release the
Call button.
The other person will hear a two (2)
second call tone. You cannot send or
receive transmissions during the two (2)
second call tone.
See page 13 on how to select
between ten (10) call tone settings.
NOAA* All
Hazards Radio Channels
and Alert (PR 350 WX only)
You can use your microTALK
®
radio to listen to
NOAA All Hazards Radio channels transmitting
in your area.
You can also program your microTALK
radio to sound a tone alert when a local NOAA
channel activates an Emergency All Hazards
Alert. This will warn you of weather, chemical,
and other civilian emergencies.
*National Oceanographic and Atmospheric Administration
Nothing
comes close to a
Warranty
button.
®
Cobra
9

Advertisement

loading

This manual is also suitable for:

Microtalk pr 350 wx