System Event Logs - Lenovo ThinkSystem SD530 Manual

Local Link Address
VLAN Support
Advanced Setting for BMC
Ethernet
Advanced Settings for BMC Ethernet
Item
Autonegotiation
Data rate
Duplex
Maximum Transmission Unit
Note: Changes will be valid after saving network settings in previous page.

System event logs

Use this menu to clear or view the System Event Log.
48
ThinkSystem Server with Intel Xeon SP (1st, 2nd Gen) UEFI Manual
N/A
Enable VLAN Support to specify the 802.1q VLAN ID on
• Enable
the management port network device. Disable is the
• Disable
default setting.
N/A Advanced Setting for BMC Ethernet.
Options Description
Choose whether the Data rate and Duplex network
• No
settings are configurable or not. Yes is the default setting.
• Yes
Autonegotiation is
Amount of data to be transferred per second over LAN
'Yes': connection.
Auto
Autonegotiation is
'No':
100 Mb (Ethernet)
10 Mb (Ethernet)
Autonegotiation is
Type of communication channel used in your network.
'Yes': [Full]: Allow data to be transferred in both directions at
once. [Half]: Allow data to be transferred in either one
Auto direction or the other, but not both at the same time.
Autonegotiation is
'No':
Half
Full
Specify the maximum size of a packet (in bytes) for the
1500
network interface. The valid range is 68 – 1500. 1500 is
the default setting.