Lenovo ThinkSystem SN850 Quick Start

Lenovo ThinkSystem SN850 Compute Node
Type 7X15
Quick Start
In the box
SN850 Compute Node

Printed documentation

If any item is missing or damaged, contact your place of purchase.
Ensure that you retain your proof of purchase. They might be
required to receive warranty service.
First glance
Front view: Four 2.5-inch hot-swap HDD or SSD compute node
model
USB 3.0 connector
KVM connector
Drive activity LED (green)
Drive status LED (yellow)
Drive activity LED (green)
Setting up the system
Install the required compute node components.
1.
Install the compute node into the chassis.
2.
Make sure the chassis is connected to power.
3.
Connect the management controller to the network.
4.
Power on the compute node.
5.
Configure the system.
6.
For detailed information about installing hardware options and
configuring the system, see the following website:
http://thinksystem.lenovofiles.com/help/index.jsp
Drive status LED (yellow)
Power button/LED (green)
Identification LED (blue)
Fault LED (yellow)
USB management button
Technical specifications
Dimensions and weight
Height: 55.5 mm (2.2 inches)

Depth: 492.7 mm (19.4 inches)

Width: 435.3 mm (17.1 inches)

Weight:


Minimum: 9.3 kg (20.6 lbs)

Maximum: 12.3 kg (27.0 lbs)
Processor
Your compute node supports the following processor:
®
Intel Xeon processor scalable family

Standard: Two processors

Maximum: Four processors

Memory
Slots: 48 DIMM connectors

8 GB, 16 GB, and 32 GB RDIMMs

64 GB LRDIMMs

Note: mixing of RDIMMs and LRDIMMs is not supported
Storage
Supports up to four 2.5-inch hot-swap drive bays

Supported drives:


SAS/SATA hot-swap hard disk drives/solid-state drives

NVMe solid-state drives
Networking

Supports up to four I/O adapter slots for connecting to chassis
switch bays
PN: SP47A10202
Printed in China