Rf Meter; External Speaker - Cobra 29WXNWST How To Use Manual

29 WX NW ST manual 3.3 6/15/99 2:53 PM
Operation

RF Meter

RF Meter
This meter swings proportionately to the RF
output (outgoing signal) while transmitting.
The
1
S/RF position.
22
Page 22
S/RF-SWR-CAL switch must be in the

External Speaker

The external speaker jack is used for remote
receiver monitoring.
1 Connect an external speaker to the external
speaker jack on the rear panel.
Operation
External Speaker
Note
The external speaker should
have 8-ohm impedance and be
rated to handle at least 4.0
watts. When the external speak-
er is plugged in,the internal
speaker is automatically discon-
nected. See accessory page 39.
Note
Cobra external speakers are
rated at 10 watts.
23