Removing & Installing Body Components; Battery - Honda CMX500A 2019 Owner's Manual

Removing & Installing Body Components

Battery

# Removal
Make sure the ignition switch is in the
(Off) position.
Remove the seat.
1.
Remove the data link connector and air
2.
check connector while pressing each tab
from the battery cover.
Remove the connector holder and relay
3.
holders from the battery cover.
Release the wire harness from the guide
4.
on the battery cover.
66
P. 70
2
Relay holders
Battery
cover
Data link
connector
Air check connector
Connector holder
Wire
harness
Guide
Tab
Tab