Advertisement
Quick Links
Installation Guide
Assembly kit PCV-VFGS 2 DN 150-250
Assembly kit valve unit
PCV-VFGS 2 DN 150-250
❶
❸
min 300
District Energy
Ø 10×0,8×1500 mm
Throttling element
min 300
VI.JA.N1.02
+ ◯
Stainless steel
AFP VFG 2 DN 40
❷
②
③
➍
①
②
Seal pot 1,0 l
Pilot controller
Copper
Ø 10×0,8×1500 mm
①
④
②
③
①
②
③
DEN-SMT/SI
1
Advertisement
Related Manuals for Danfoss PCV-VFGS 2 DN 150-250
Summary of Contents for Danfoss PCV-VFGS 2 DN 150-250
- Page 1 Installation Guide + ◯ Assembly kit PCV-VFGS 2 DN 150-250 Seal pot 1,0 l Stainless steel Pilot controller Copper Assembly kit valve unit Ø 10×0,8×1500 mm AFP VFG 2 DN 40 Ø 10×0,8×1500 mm Throttling element PCV-VFGS 2 DN 150-250 ❶...
- Page 2 Installation Guide Assembly kit PCV-VFGS 2 DN 150-250 ❺ ❻ ② Throttling element ③ ① ④ Seal pot ② ➐ ① ② ③ Cu Ø 10 × 1 DEN-SMT/SI VI.JA.N1.02 District Energy...
- Page 3 Installation Guide Assembly kit PCV-VFGS 2 DN 150-250 ❽ PCVP ◯ Main controller ◯ ◯ Trottling element Main controller Trottling element Pilot controller ◯ Pilot controller Installation in the return pipe Installation in the supplay pipe PCVD PCVSD PCVA Main controller...
- Page 4 Installation Guide Assembly kit PCV-VFGS 2 DN 150-250 LANGUAGE ENGLISH Safety Note Bypass pre-assembly ❶ 1. Connect a throttling element to the pilot To avoid injury and damage to persons valve flange to flange. and devices, it is absolutely necessary 2. Align flow direction – throttle in front of the these instructions are carefully read and pilot valve.