Before Operation; Before Operation Safety; Pre-Start - Toro TimeCutter SS 4225 Operator's Manual

Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

•
Evaluate the terrain to determine what accessories
and attachments are needed to properly and
safely perform the job. Only use accessories and
attachments approved by Toro.
•
Inspect the area where the equipment is to be
used and remove all rocks, toys, sticks, wires,
bones, and other foreign objects. These can
be thrown or interfere with the operation of the
machine and may cause personal injury to the
operator or bystanders.
•
Wear appropriate personal protective equipment
such as safety glasses, substantial slip-resistant
footwear, and hearing protection. Tie back long
hair and avoid loose clothing and loose jewelry
which may get tangled in moving parts.
CAUTION
This machine produces sound levels in
excess of 85 dBA at the operator's ear and
can cause hearing loss through extended
periods of exposure.
Wear hearing protection when operating
this machine.
•
Check that the operator presence controls,
safety switches, and shields are attached and
functioning properly. Do Not operate unless they
are functioning properly.
•
Do Not operate the mower when people, especially
children, or pets are in the area. Stop the machine
and attachment(s) if anyone enters the area.
•
Do Not operate the machine without the entire
grass collection system, discharge deflector,
or other safety devices in place and in proper
working condition. Grass catcher components
are subject to wear, damage and deterioration,
which could expose moving parts or allow objects
to be thrown. Frequently check for worn or
deteriorating components and replace them with
the manufacturer's recommended parts when
necessary.

Pre-Start

Fill fuel tank on level ground. See Fuel
Recommendations in the Specifications section for
additional gasoline information.
Do Not add oil to gasoline.
Do Not overfill fuel tank. Fill the fuel tank to the bottom
of the filler neck. The empty space in the tank allows
gasoline to expand. Overfilling may result in fuel
leakage or damage to the engine or emission system.
Make sure you understand the controls, their locations,
their functions, and their safety requirements.
Refer to the Maintenance section and perform all the
necessary inspection and maintenance steps.
14