Table of Contents
Advertisement
Receive Receipt performs the same operation as when All Notes Off is received. Regardless of the
reception of this message, the instrument always operates as Poly mode.
5.29
Poly (7FH)
Message Format:
n:
Receive Receipt performs the same operation as when All Notes Off is received. Regardless of the
reception of this message, the instrument always operates as Poly mode.
6
Program Change
Message Format:
n:
pp:
Note1: For details about the relationship between the program number and the tone, see the Tone List that comes with the
Instrument.
Transmit Sent when a tone number is selected.
Receive Receipt changes the tone of the corresponding part. The selected tone is determined by the
program value of this message and the Bank Select message value received prior to this message.
6.1
DSP Assignments during Tone Selection
6.1.1
DSP Line Structure
Though the Instrument has four DSP lines that can be used simultaneously, selecting a tone that uses
DSP causes the required number of DSP lines to become reserved so the tone is configured with the
requisite DSP. For information about tones that use DSP, see "17 Tone with DSP List".
6.1.2
DSP Line Assignment
Selecting multiple tones with DSP at the same time creates the possibility that there will not be enough
DSP lines. In this case, the last selected tone with DSP is given priority. Some DSP line(s) already
being used will be released so they can be assigned to the newly selected tone.
7
Channel After Touch
Message Format:
n:
vv:
Receive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
BnH 7FH 00H
MIDI Channel Number
CnH ppH
MIDI Channel Number
Program Number (Note1)
DnH vvH
MIDI Channel Number
Value
16
Advertisement
Table of Contents
