Advertisement
This section will show you how to use the LMF-400 Multi-function
gauge to configure your EP-80R TH Temperature Sensor.
Boat Setup
If this is the first time you have turned on your LMF-400, you will have
to complete Boat Setup before you will be able to configure your temp
sensor. If you have already completed Boat Setup, skip ahead to the
segment covering EP-80R TH Configuration.
To execute Boat Setup:
1. With Boat Setup highlighted on the screen, press
Setup menu will appear, allowing you to select an engine-tank configu-
ration to match the number of engines and fuel tanks on your vessel.
The Boat Setup menu options are: 1 Eng/1 Tank, 1 Eng/2 Tank, 2 Eng/1
Tank, 2 Eng/2 Tanks, 3 Eng/1 Tank or 3 Eng/3 Tanks.
2. Use the
UP
that applies to your vessel and press
gine/tank configuration, the Tank Size menu will appear with up to
three tank options. (If you selected one tank during Boat Setup, you
will be taken directly to the Setting Tank Size Window in Step 4.)
3. Select the desired tank and press
Tank Size window.
4. Use the
and
UP
will hold and press
each of the remaining tanks.
Busse-Yachtshop.de
LMF-400: EP-80R TH
Temp Configuration
LMF-400 Multi-function Digital gauge.
and
keys to select the engine-tank configuration
DOWN
keys to input the number of gallons the tank
DOWN
. Press
ENTER
. After setting the en-
ENTER
, which will open the Setting
ENTER
and repeat steps 3 and 4 for
EXIT
15
info@busse-yachtshop.de
. The Boat
ENTER
Advertisement
