Advertisement
To unconfigure a temp sensor:
1. Press
, use the
MENU
press
.
MENU
2. Highlight
B. D
list.
3. Select a temp sensor from the Bus Devices list and press
Configuration Options menu will appear with two choices: Unconfig
(Unconfigure) and Reconfig (Reconfigure).
4. Select
U
NCONFIG
Hit Menu to Unset Device Name.
5. Press
MENU
Bus Devices list, where the temp you unconfigured will be listed as
Uncfg Temp.
To reconfigure a temp sensor:
To reconfigure a sensor, there must be a configuration name available
(Water, Outside or Inside). If you try to reconfigure a sensor when the
desired configuration name (Water, Outside and Inside) is in use, a
Name Already Selected message will appear.
If all three temps are configured — meaning there is no name configura-
tion available — follow the first set of instructions. If the desired con-
figuration name is available, follow the second set of instructions.
The first set of instructions below will show you how to switch the con-
figuration of a water temp to an outside temp.
If all temps configured (Configuration name unavailable):
1. Press
, use the
MENU
press
.
MENU
2. Highlight
B. D
list.
3. Highlight
W
menu will appear.
4. Select
U
NCONFIG
Hit Menu to Unset Device Name.
5. Press
MENU
list, where the temp you unconfigured (Water Temp) will be listed as
Uncfg Temp.
6. Highlight
O
UT
options menu will appear.
Busse-Yachtshop.de
and
UP
and press
EVICES
and press
MENU
to unconfigure the sensor. You will be directed to the
and
UP
and press
EVICES
and press
T
TR
EMP
and press
MENU
to unconfigure the sensor and return to the Bus Devices
(Outside Temp) and press
T
keys to select
DOWN
, which will open the Bus Devices
MENU
. The following message will appear:
keys to select
DOWN
, which will open the Bus Devices
MENU
. The Configuration Options
MENU
. The following message will appear:
MENU
11
info@busse-yachtshop.de
S
S
YSTEM
ETUP
. The
MENU
S
S
YSTEM
ETUP
. The configuration
and
and
Advertisement
