Chapter 1: Introduction; The 24-Port 10/100 Switch; Features - Cisco SR224R User Manual

Chapter 1:
Introducton

The 24-Port 10/100 Switch

With its advanced switching technology, the 24-Port 10/100 Switch will
boost your network performance with much more than just full duplex
data transfer and dedicated bandwidth . It features non-blocking, wire-
speed switching that forwards packets as fast as your network can deliver
them . Address learning and aging are included to prevent data transfer
errors and data flow control to help prevent packet collisions .
The SR224R is designed to fit in a standard equipment rack using the
included rack mount brackets . However, its minimal depth and fanless
design makes it suitable to be located anywhere .
No matter how intensive your network demands, the 24-Port 10/100
Switch has speed, flexibility, and reliability that you can count on .

Features

Ideal for integrating your 10BaseT and 100BaseTX network
•
hardware
• 24 10/100 Ports provide dedicated bandwidth in half or full-duplex
modes
• Switched 10/100 ports run at up to 200Mbps in full-duplex mode
Each port supports Auto MDI/MDI-X cable detection
•
Compatible with all major network operating systems
•
Advanced Store-and-Forward packet switching optimizes data
•
transfers
• Auto partitioning protects PCs from downed network lines
Signal regeneration ensures data transfer integrity
•
24-Port 10/100 Swtch
Chapter 1: Introducton
1