Deleting Data
Deleting a Particular Record
●
1.
Enter the Altitude Record Recall Mode.
Navigating Between Modes
l
2.
Use the (A) and (C) buttons to scroll
through the top screens of the records and
display the one you want to delete .
3.
Hold down the (D) button for at least two
seconds. Release the button as soon as
[CLEAR] stops flashing.
This deletes the record you selected.
Note that holding down (D) for more
●
than five seconds will delete all data.
Deleting All Records
●
Hold down (D) for at least five seconds until
[CLEAR ALL] stops flashing. This indicates
that all data was deleted.
Watch Operation Guide 5678
The stopwatch can be used to perform 1/100
second elapsed time measurement up to 23
hours, 59 minutes, 59.99 seconds.
It can also measure split times.
Measuring Elapsed Time
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Hours, minutes, seconds, 1/100 seconds
3.
Press (C) to reset the stopwatch to all
zeros.
Stopwatch
A
Start
A
Stop
A
Resume
A
Stop
Measuring a Split Time
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
A
Start
C
Split
C
Split release
A
Stop
Hours, minutes, seconds, 1/100 seconds
3.
Press (C) to reset the stopwatch to all
zeros.
Timing the First and Second
Place Finishers
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
A
Start
C
1st Finisher*
A
2nd Finisher*
* Displays the time of the first finisher.
Hours, minutes, seconds, 1/100 seconds
3.
Press (C) to display the time of the second
place finisher.
4.
Press (C) to reset the stopwatch to all
zeros.
30