Table of Contents
Advertisement
Preparing for Installation
Ethernet cables must be shielded when used in a central office environment. Statement 171
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
Warning
Read the installation instructions before connecting the system to the power source. Statement 1004
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
Warning
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
•
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
•
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
•
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in
the rack.
Class 1 laser product. Statement 1008
Warning
Avoid direct exposure to the laser beam. Statement 1012
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
A readily accessible two-poled disconnect device must be incorporated in the fixed wiring.
Warning
Statement 1022
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Cisco ME 4924-10GE Ethernet Switch Hardware Installation Guide
2-2
Statement 1006
Chapter 2
Switch Installation
OL-10071-01
Advertisement
Table of Contents
Troubleshooting
