Example Of System Configuration - Toshiba LC531 Series Instruction Manual

4.1 Example of System Configuration

Because the I/O input and output of the LC53* are built-in, you don't need to
register a new I/O module. The LC53* has multiple analog I/Os and digital I/Os.
In the example below, 1 point of MV output, 1 point of analog output, 2 points
of analog inputs, 3 points of digital input, and 3 points of digital output are
used. The input and output points are assigned to tags to be used. The nv
Engineering Tool is connected via Ethernet.
Ethernet
nv Engineering Tool
Remark
• Use "nv Series Engineering Tool 4" of Version 4.9.6 or later to register the LC531 system.
• Use "nv Series Engineering Tool 4" of Version 4.10.6 or later to register the LC532 system.
LC53*
Figure 4-1 Example of system configuration
Unified Controller Single-Loop Controller LC531 Instruction Manual
4.3 Tag Registration
MV output (MV1)
Analog output (AO1)
Analog input (A1I to AI2)
Digital input (DI1 to DI3)
Digital output (DO1 to DO3)
57