Table of Contents
Advertisement
4
1. Assemble I/F BD, SPS BD
and SPS+LED BD to main
shielding
2. Lock PCBA with 11 screws
3. Assemble Wire EDP to I/F
BD and fix it by tape
4. Paste 1 yellow tape on the
connector of Wire EDP to fix
it on I/F BD
5. Assemble mylar on SPS BD
6. Connect wire to Docking BD
7. Assemble Docking BD to
the back of main shielding
and fix it by 1 screw
8. Paste 1 conduct tape to the
upper-right corner of main
shielding
- 14 -
Philips-
head
screwdr
iver
(Screw
Torque:
10±0.5k
gf)
Advertisement
Table of Contents
