At*V Activate V.25Bis Mode; At*Nokiatest Test Command; At+Cesp Enter Sms Block Mode Protocol; Sms Commands Used In Text And Pdu Modes - Nokia PremiCell Manual

AT*T Activate SMS Block mode.

AT*V Activate V.25bis Mode

This command activates the CCITT V.25bis command mode.
Syntax:
AT*V Activate V.25bis command mode

AT*NOKIATEST Test Command

This command can be used to test that the data adapter communi-
cates with the terminal. Either the response OK or ERROR is re-
turned.
AT*NOKIATEST Test connection to terminal.

AT+CESP Enter SMS Block Mode Protocol

Sets the data adapter in the SMS Block mode. The final result code
OK (or 0) shall not be returned until block mode is exit-
ed.
AT+CESP Activate SMS Block mode.

2.8. SMS Commands Used in Text and PDU Modes

AT+CSMS Select Message Service

This commands selects the messaging service and returns the type
of messages supported. The supported service is specified by GSM
03.40 and 03.41 (service value 0).
Syntax:
AT+CSMS=0
AT+CSMS?
AT+CSMS=?
ã2000 Nokia Mobile Phones. All Rights Reserved.
Syntax:
Syntax:
Select message service.
Response is +CSMS: <mt>,<mo>,<bm>.
Query current setting.
Response is +CSMS: 0,<mt>,<mo>,<bm>.
Show supported services.
Response is +CSMS: 0.
39