Appendix C
Installing and Upgrading Memory and Virtual Private Network Modules
Closing the Chassis
Step 1
Step 2
Step 3
OL-9558-01
After installing memory or a VPN module on the motherboard, attach the router
cover by following these steps:
If you disconnected the fan from the motherboard in the
procedure, reconnect the fan cable to the connector labeled FAN on the
motherboard.
Locate the posts that protrude from the inside of the chassis cover, and locate the
corresponding openings on the chassis bottom.
Line up the posts with the corresponding openings, as shown in
carefully slide the posts into the openings, taking care not to damage the router
motherboard with the posts.
Cisco 815 Integrated Services Router Hardware Installation Guide
Closing the Chassis
"Opening the Chassis"
Figure
C-8, and
C-13