Closing The Chassis - Cisco 880 Series Installation Manual

Closing the Chassis

Figure 7 Opening the Chassis
Place the router bottom on an antistatic mat.
Step 5
Closing the Chassis
To close the chassis, you will need a number-2 Phillips screwdriver and a wrist strap.
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Installing Memory and Power Over Ethernet in Cisco 880 Series and Cisco 890 Series Integrated Services Routers
10
OL-16194-01