Cisco 3825 Non Proprietary Security Policy page 22

Cisco 3825 and Cisco 3845 Routers
implemented by the software. An example of self-tests run at power-up is a cryptographic known answer
test (KAT) on each of the FIPS-approved cryptographic algorithms and on the Diffie-Hellman algorithm.
Examples of tests performed at startup are a software integrity test using an EDC, and a set of Statistical
Random Number Generator (RNG) tests. Examples of tests run periodically or conditionally include: a
bypass mode test performed conditionally prior to executing IPSec, and a continuous random number
generator test. If any of the self-tests fail, the router transitions into an error state. In the error state, all
secure data transmission is halted and the router outputs status information indicating the failure.
Examples of the errors that cause the system to transition to an error state:
•
•
•
•
•
Self-tests performed by the IOS image
IOS Self Tests
•
•
Self-tests performed by Safenet
Safenet Self Tests
•
Cisco 3825 and Cisco 3845 Integrated Services Routers FIPS 140-2 Non Proprietary Security Policy
22
IOS image integrity checksum failed
Microprocessor overheats and burns out
Known answer test failed
NVRAM module malfunction.
Temperature high warning
POST tests
AES Known Answer Test
–
Software/firmware test
–
Power up bypass test
–
RNG Known Answer Test
–
Diffie Hellman test
–
HMAC-SHA-1 Known Answer Test
–
SHA-1 Known Answer Test
–
DES Known Answer Test
–
3DES Known Answer Test
–
Conditional tests
Conditional bypass test
–
Continuous random number generation test
–
POST tests
AES Known Answer Test
–
DES Known Answer Test
–
3DES Known Answer Test
–
HMAC-SHA-1 Known Answer Test
–
SHA-1 Known Answer Test
–
OL-8662-01