Dell EMC PowerEdge XR11 Installation And Service Manual page 12

Table 3. Features available on the rear view of Rear Accessed configuration (continued)
Item
Figure 4. Rear view of Front Accessed configuration
Table 4. Features available on the rear view of Front Accessed configuration
Item
1
2
3
NOTE: For more information, see the Dell EMC PowerEdge XR11 Technical Specifications on the product documentation
page.
12 PowerEdge XR11 sistem overview
Ports, panels, or slots
Ports, panels, and slots
Status LED control panel
Drives
Information tag
Icon
Icon
N/A
N/A
N/A
Description
NOTE:
● To reset iDRAC using
system ID, ensure that
the system ID button is
enabled in the iDRAC
setup.
● If the system stops
responding during
POST, press and hold
the system ID button
(for more than 5
seconds) to enter the
BIOS progress mode.
Description
Contains the system health,
system ID, status LED.
● Status LED: Enables you
to identify any failed
hardware components.
There are up to five
status LEDs and an
overall system health
LED (Chassis health and
system ID) bar. For
more information, see
the Status LED indicators
section.
Enables you to install up to
4x 2.5-inch SAS/SATA/NVMe
SSD drives.
The Information tag is a slide-
out label panel that contains
Service Tag, iDRAC MAC
address and LOM 1 MAC
address.