EasyPro LED2K Instructions For Operation, Safety, Warranty

LED2K • LED3K • LED48WK
Underwater LED Light Kits
Instructions for Operation • Safety • Warranty
Thank you for purchasing an EasyPro submersible LED
pond light kit. With this kit you can make your fountain
glow, illuminate your pond from within, highlight your wa-
terfall and extend the enjoyment of your water feature in
the evening hours. These light kits are fully submersible.
The LED3K and LED48WK have a three year limited war-
ranty. LED2K lights have a one year limited warranty and
the transformer included has a three year warranty.
Safety and Electrical Connections:
Always disconnect the electrical
1.
supply before handling,
maintaining, repairing or installing
any pond equipment.
2. Light(s) must be attached to a 12 volt
UL listed transformer.
3. Never hook the lights directly to a
110 volt or higher outlet.
4. Connect the transformer only to a 110
volt receptacle that is protected by a
Ground Fault Circuit Interrupter.
5. Do not use this product in bathrooms
or swimming pools.
6. All electrical work must be performed
by a qualifi ed technician. Always fol-
low the National Electrical Code (NEC)
or the Canadian Electrical Code as well as all local, state and provincial
codes. Code questions should be directed to your local electrical inspec-
tor. Failure to follow electrical codes and OSHA safety standards may result
in personal injury or equipment damage. Failure to follow manufacturer's
installation instructions may result in electrical shock, fi re hazard, personal
injury or death, damaged equipment, provide unsatisfactory performance
and may void manufacturer's warranty.
Submersible
LED2K
LED3K
LED48WK