EasyPro LED6WP Instructions For Operation, Safety, Warranty

6 Watt Submersible, Warm White, Low Voltage • LED6WP
Underwater LED Light
Instructions for Operation • Safety • Warranty
Thank you for purchasing an EasyPro submersible LED pond light. With this warm, white
LED light you can make your fountain glow, illuminate your pond from within, highlight
your waterfall and extend the enjoyment of your water feature in the evening hours. The
LED6WP can be used in the landscape out of the water or as a submersible underwater
light with other warm white LED or halogen fixtures.
LED6WP Specs:
• Plastic housing, glass lens, epoxy filled base,
four colored plastic lens covers
• Power usage at 12V AC: 6 watts
• Power cable: 30 ft, # 20-2, SPT-2-W leads
• 3 year warranty on housing
• 2 year warranty on bulb
(Magnetic 12 vac transformer required)
LED Bulb information
• Integrated driver
• 25° beam angle
• Color Temperature: 2800° K
• 2 year warranty
(Magnetic 12 vac transformer required)
• Free of UV/IR radiation
• Mercury free, RoHS compliant
• Uses LED chip manufactured by CREE
Safety and Electrical Connections:
1 Always disconnect the electrical supply before handling, maintaining, repairing or
installing any pond equipment.
2 Light(s) must be attached to a 12 volt UL listed magnetic transformer.
3 Never hook the lights directly to a 120 volt or higher outlet.
4 Connect the transformer only to a 120 volt receptacle that is protected by a Ground
Fault Circuit Interrupter (GFCI).
5 Do not use this product in bathrooms or swimming pools.