LG BX401C Service Manual page 14

11-3. Adjustment
(1) Select ADJ -> AutoCCA ->
remote controller.
(2) The White Balance adjustment is automatically started.
(3) After about 45 second, check "Succuss" message (press
'ENTER' key at the remote controller for adjusting to exit.)
(4) When 'Fail' message is displayed, Perform (1)~(3) again
12. Measuring the Projector Brightness
12-1. Preparation for Adjustment
(1) Set Setting
- Input source: Default(not necessary to specify the source)
(2) Measuring the Brightness
- Remote control : Adj -> optic check -> White
12-2. Configuring the Projector Brightness
Measuring JIG Software
(1) Select the Model: BX401C-JD
(2) Screen Size: W: 813, H: 610
(3) Examination
(3) Examination
(1) Select Model
<Fig. 12-1> Configuring the Brightness Measuring JIG Software
12-3. Setting the Brightness Measuring Screen
(1) Screen size setting
- Correctly set to the screen size by model as shown at
<Fig. 12-3>.
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
(Vol +) at the adjustment
▶
(2) Screen Size
<Fig. 14> Configuring the Brightness Measuring JIG
<Fig. 6-3> Brightness Measuring Screen Size
- 14 - LGE Internal Use Only