Advertisement
Ƽ
Once the connection to our Customer Monitoring Center is
made, the operator will attempt to communicate with you
using the two-way voice feature. Simply respond to the operator
using your normal voice. The unit is equipped with a sensitive
microphone, so you do not need to shout.
Ƽ
If you pressed the button by accident, remain calm.
Either press the Reset Button (Figure E) on the BASE
UNIT (Figure A) or wait until voice contact is made,
then inform the operator that you pushed the button
in error and that you are okay.
What happens if there's a power outage?
Ƽ
Your ADT Medical Alert unit comes with a rechargeable battery
inside. If your power is ever interrupted, the backup battery
can operate your unit for up to 20 hours. Before your battery
runs out, the Base Unit (Figure A) sends a low battery signal
to our Customer Monitoring Center to inform our Monitoring
Professionals that your unit will soon be nonfunctional. An ADT
Monitoring Professional will then call you to advise you of the
low battery condition and answer any questions.
What if I have to ship my ADT Medical Alert System?
Locate the On/Off Switch0
1.
(Figure F) at the back of the
Base Unit (Figure A).
2.
Using a small screwdriver
or pen, slide the switch to
the Off position.
Unplug the Base Unit (Figure
3.
A) from both the electrical
wall outlet and wall jack.
4.
To be sure the unit is
deactivated, press the
Help Button (Figure C).
Your device is ready to ship.
On/Off Switch
Figure F
Reset Button
Figure E
Advertisement
