Led Explanation; Port And Button Description - TP-Link RE105 User Manual

Chapter 1
1. 2. 1.

LED Explanation

You can check the extender's working status by following the LED Explanation table.
Name
Signal
Power
1. 2. 2.

Port and Button Description

Ports or Buttons
(WPS Button)
RESET Button
Ethernet Port
Note: Make sure the device is being used within 0-40℃ and stored within -40-70℃.
Status
The extender is connected to your router's wireless network
Solid blue
and is in a suitable location.
The extender is experiencing poor signal strength. Try
Solid red
relocating it closer to your router.
Blinking WPS connection is in progress.
Off No wireless connection is established.
On/Off The extender is on or off.
Blinking The system is starting up or firmware upgrade is progress.
Press the WPS button on your host router, and immediately press the WPS
button on the extender for 1 second. The Signal LED of the extender should
change from blinking to solid on, indicating successful WPS connection.
With the extender powered on, use a pin to press the RESET button for 1
second. The extender will reset and reboot.
Connect your Ethernet-only device to the Ethernet port of the extender to join
the network.
Get to Know About Your Extender
Indication
Description
5