Adjust Wi-Fi Coverage - TP-Link RE105 User Manual

Chapter 3
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Settings > Network.
3. Select Use the following IP
4. Enter a new IP address as needed and leave the
5. Enter the gateway that is in the same subnet as the
the LAN IP address of your extender.
6. Leave the primary and secondary DNS addresses as the default settings.
7. Click SAVE.
3. 4.

Adjust Wi-Fi Coverage

You can set the extender's Wi-Fi coverage depending on how large you want your Wi-Fi
area to be.
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Settings > Advanced Settings
3. Select Maximum Coverage,
your Wi-Fi coverage of the extender.
address.
> Wi-Fi Coverage.
Intermediate Coverage
Customize Your Network
Subnet Mask as the default settings.
IP Address. The gateway is usually
or Minimum Coverage to adjust
17