Advertisement
Master/Slave
The Master/Slave mode will allow you to link up to as many units you want in a daisy chain fashion. In
this mode, the first unit in the daisy chain will automatically command all other units following.
Connecting the CH-158 for (Master/Slave) operation does not require any menu or setting selections.
Simply connect each unit in a daisy like fashion using a CH-DIN20 5 pin DIN cable. Only the first unit
in the chain can be controlled by the optional CB-FS footswitch controller.
MASTER /SLAVE SETTIN GS
1)
Connect the 5 pin plug cable to the LINK (Out) connector of the first fixture.
2)
Connect the other end of the 5 pin cable coming from the first fixture to the LINK (In) connector
on the next fixture as illustrated below.
Optional Footswitch
Controller
Note! The CH-158 and CH-175 can also be linked together.
CB-FS Color Bank Foot Controller
CB-FS PEDALS
P
EDAL
A
/C
UDIO
F
O
ULL
N
B
LACKOUT
Only the first unit in the chain can be controlled by the CB-FS footswitch controller.
The CH-158 & CH-175 are compatible in this series and can both be linked together. The first unit
you choose will control the rest using the CB-FS footswitch controller or in stand-alone mode.
Please refer to the Color Bank™ manual for alternate control methods and definition of button
functions.
STILL CAN'T GET IT TO WORK?
GIVE US A CALL (954) 929-1115 Ext 22
F
UNCTION
AUDIO: Activates Audio mode
HASE
CHASE: Activates Chase Speed
mode
All lights will be turned on.
All lights will be turned off.
www.chauvetlighting.com
Daisy Chain
CB-FS F
OOTSWITCH
(9:00AM – 5:00PM EST)
3
Advertisement
