Operating Instructions; Master/Slave & Stand-Alone Mode; Daisy Chain Connection; Built-In Program Options - Chauvet COLORsplash JR LED-PAR83 User Manual

Chauvet led-par83 light fixtures: user manual
Hide thumbs Also See for COLORsplash JR LED-PAR83:
Table of Contents

Advertisement

O
PERATING
The COLORsplash™ JR is a DMX-512 controllable, full RGB color mix par can made up of highly
efficient and super bright leds. There are three color groups (Red, Green and Blue) whose intensity
can be controlled individually allowing the creation of an unlimited range of colors.
The COLORsplash™ JR can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing
4 channels.
Master/Slave & Stand-Alone Mode
The Master/Slave mode will allow you to link up to as many units you want in a daisy chain fashion. In
this mode, the first unit in the daisy chain will automatically command all other units following.
1. Connect all COLORsplash™ JR units in a
daisy chain fashion as described in the
section following.
2. Master Unit: Set dipswitch # 9 to ON and #10
to OFF.
3. Slaves: Set dipswitch # 10 to the ON position
and all others to the OFF position.
4. You can also run the fixtures in an automatic
stand-alone mode by simply setting all
fixtures to run as master units.
Da is y Ch ai n Conn e ct i on
1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector
of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin
connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then,
proceed to connect from the output as stated above to the input of the following fixture and so on.
AC Line
Bui lt - i n P rog r am O pt i ons
There are 8 Individual programs that can be
accessed by turning ON dipswitches 1 through 8
individually.
LED-PAR83 User Manual
I
NSTRUCTIONS
Optional DMX Controller
DMX512
IN
OUT
ON
TM
COLORsplash Jr.
POWER
FUSE
POWER
IN AC
OUT AC
Use AC linking cable for convenience. As many as 50 par cans
can be powered from one AC daisy chain connection.
DMX512
IN
OUT
COLORsplash Jr.
POWER
FUSE
IN AC
DMX512
IN
OUT
COLORsplash Jr.
FUSE
POWER
IN AC
Use 3-pin XLR DMX cable
DMX512
DMX512
IN
OUT
IN
ON
TM
COLORsplash Jr.
COLORsplash Jr.
POWER
FUSE
POWER
FUSE
POWER
IN AC
OUT AC
IN AC
ON
7
ON
ON
TM
Master Setting
POWER
OUT AC
ON
ON
TM
Slave Setting
POWER
OUT AC
Continue
DMX512
OUT
IN
OUT
ON
ON
TM
TM
COLORsplash Jr.
POWER
POWER
FUSE
POWER
OUT AC
IN AC
OUT AC
Continue
Dipswitches 1 ~ 8
(programs)
2005-09-29/19:19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents