Hyundai H-CMD4002 Instruction Manual page 25

System switch
In TV mode press BND/TA/SYS button to switch PAL/SECAM/NTSC system.
In play mode press BND/TA/SYS button to switch AUTO/PAL/PAL60/NTSC system
Programming the playback
1. Press PBC button, then press ST/PROG button, it displays P00:00.
2. Use digit buttons to enter the number of the desired track to be on selected position.
For VCD and CD, select track number.
3. Press PLAY/ PAUSE button to play, or move the cursor to select PLAY and press ENTER to play.
4. If you want to delete the list, move the cursor to CLEAR, press ENTER to delete all the list set before.
5. Press ST/PROG again to exit program play.
Selecting different audio modes
For DVD disc: press R/L/ST/AF button on the panel or AUDIO on the RC repeatedly to select the audio
language to listen (if the disc supports multi-language mode).
For VCD disc: press R/L/ST/AF button on the panel repeatedly to select the following modes:
L R STEREO (Channel left => Channel right => Stereo).
Changing the subtitle language (for DVD only)
Subtitle language is in disc initiation setting during playback. Press SUB.T button to switch among
disc-supported languages. If the disc only supports one subtitle, the function will not work. If no operation within
5 seconds, language description will disappear.
On-screen display
Press OSD button. The display shows single track elapsed time, single track left time or entire disc.
25