Hyundai H-CMD4002 Instruction Manual page 14

Press the VOL 3 times, then rotate to adjust the treble level.
- BALANCE control
Press the VOL 4 times, then rotate to adjust the balance level.
- FADER control
Press the VOL 5 times, then rotate to adjust the fader level.
- BRIGHTNESS control
Press the VOL 6 times, then rotate to adjust the brightness level.
- CONTRAST control
Press the VOL 7 times, then rotate to adjust the contrast level.
- COLOR control
Press the VOL 8 times, then rotate to adjust the color level.
- SHARP control
Press the VOL 9 times, then rotate to adjust the sharp level.
- HUE control
Press the VOL 10 times, then rotate to adjust the hue level.
Or press SEL button on the RC repeatedly to select the desired mode: VOL BAS TRE FAD BAL.
When P-EQ mode is activated, press SEL button to select the modes: BRI CON SHA SHAR COL
Note:
If turning off the power all the settings of each mode will be saved.
If turning off the ACC power all the settings will become as they were set on the plant as current.
If you don t adjust VOL knob within 3 seconds after selecting the desired setting, the unit will automatically
return to the current mode being displayed.
Mute control
Press and keep the PTY/MUT button on the front panel or MUTE on the RC to mute volume control. MUTE
ON will appear on the display. Press it again to resume the volume.
14