Exit The Hii Configuration Utility; Navigate To The Configuration Utility; Controller Management; View The Controller Properties - Dell HBA355e User Manual

Exit the HII configuration utility

About this task
To exit the HII configuration utility (Ctrl+C), perform the following steps:
Steps
1. Press Esc on any menu screen.
If there is only one controller, then a dialog box is displayed to confirm your choice.
2. Select OK to exit and press Enter.
If multiple controllers are present, then the Esc key brings you to the Controller Selection screen.
3. Press Esc again to reach the exit screen.
A dialog box is displayed to confirm your choice.
4. Select OK to exit and press Enter.

Navigate to the configuration utility

About this task
NOTE: You can follow this procedure for all the cards to navigate to the configuration utility.
Steps
1. Enter the HII configuration utility. See
The Device Settings screen displays a list of NIC ports and the Dell HBA355i Front configuration utility.
2. To access the HBA355i Front configuration utility, click Dell HBA355i Front Configuration Utility.
The following list of configuration options is displayed:
● Controller Properties
● Refresh Topology
● Device Properties

Controller management

Controller management allows you to configure, manage, and view the controller properties.
NOTE: Follow the procedure explained in this section for all the cards by selecting the respective card name.

View the controller properties

The View Controller Properties screen allows you to view the controller properties.
In the System Setup Main Menu, click Device Settings > Dell HBA355i Front Configuration Utility > Controller
Management > View Controller Properties
The table explains the View Controller Properties screen details:
Table 7. View Controller Properties options
Option
Controller name
Chip name
PCI revision ID
PCI Bus:Dev:Func
Manage Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, and Dell HBA350i
Enter the HII configuration
Description
Controller name
Controller chip name
Controller PCI revision ID
PCI Bus: Device: Controller function format
utility.
Adapter using HII configuration utility
39